The Best Practices for Installing Window Hinge Friction Stays

  • jack kun
  • 2024/05/16
  • 3

Window hinge friction stays are a type of hardware that helps to keep windows open at a desired angle. They are typically used on awning or hopper-style windows, but can also be used on other types of windows. Friction stays work by using a spring to create tension against the window frame, which prevents the window from closing on its own. This can be beneficial for a variety of reasons, such as providing ventilation, allowing for easy access to the outside, or preventing windows from slamming shut in high winds.

Installing window hinge friction stays is a relatively simple process, but it is important to follow the manufacturer’s instructions carefully to ensure that they are installed properly. The following are some of the best practices for installing window hinge friction stays:

Choose the Right Size

The first step is to choose the right size friction stays for your windows. Friction stays are available in a variety of sizes, so it is important to select the ones that are appropriate for the size and weight of your windows. If you choose friction stays that are too small, they may not be able to hold the window open properly. If you choose friction stays that are too large, they may be too difficult to open and close the window.

Install the Hinge

The next step is to install the hinge. The hinge is typically mounted to the window frame using screws. It is important to make sure that the hinge is installed securely, so that it can support the weight of the window.

Connect the Friction Stay

Once the hinge is installed, you can connect the friction stay to the hinge. The friction stay is typically attached to the hinge using a pin or bolt. It is important to make sure that the friction stay is connected securely, so that it can provide the necessary tension to keep the window open.

Adjust the Tension

Once the friction stay is connected, you can adjust the tension. The tension is typically adjusted by turning a screw or knob on the friction stay. You should adjust the tension so that the window stays open at the desired angle without slamming shut.

Test the Friction Stay

Once you have adjusted the tension, you should test the friction stay to make sure that it is working properly. Open and close the window several times to make sure that the friction stay is holding the window open at the desired angle. If the friction stay is not working properly, you may need to adjust the tension or replace the friction stay.


By following these best practices, you can ensure that your window hinge friction stays are installed properly and are working effectively. Friction stays can be a valuable addition to your windows, providing ventilation, easy access to the outside, and protection from slamming windows.

  • 1
    Hey friend! Welcome! Got a minute to chat?
Online Service