How to Install Casement Window Handles- A Step-by-Step Guide

Easy Guide to Installing Casement Window Handles

Do you have a casement window that has become difficult to open or close? Before you call a repairman, consider trying to replace the handle yourself. It’s a relatively simple task that can be completed in a matter of minutes, and it can save you money. Here’s a step-by-step guide that will show you how to install a casement window handle.

Tools and Materials You’ll Need

New casement window handle

Screwdriver (Phillips or flathead, depending on the type of screws holding the old handle)

Putty knife or other thin, flat object

Clean cloth

Step-by-Step Instructions

1. Remove the old handle. Use the screwdriver to remove the screws holding the old handle in place. Be careful not to damage the window frame or the handle.

2. Clean the area around the old handle. Use the putty knife or other thin, flat object to clean away any dirt or debris from the area around the old handle. This will help to ensure that the new handle fits snugly.

3. Install the new handle. Align the new handle with the holes in the window frame and insert the screws. Tighten the screws until the handle is secure, but be careful not to overtighten them.

4. Test the handle. Open and close the window several times to make sure that the handle is working properly. If the handle is loose or difficult to turn, you may need to adjust the screws.

Tips

If you’re not sure what type of casement window handle you need, take the old handle with you to the hardware store and ask for help.

Be careful not to overtighten the screws when installing the new handle. This could damage the window frame or the handle.

If you’re having trouble removing the old handle, you may need to use a penetrating oil to loosen the screws.

Conclusion

Installing a casement window handle is a simple task that can be completed in a matter of minutes. By following these instructions, you can save money and get your window working properly again.