How to Install Awning Window Hinges Like a Pro

Awning windows are a popular choice for homeowners looking to add a touch of style to their homes. They are also a great way to let in natural light and ventilation. But if you’re not careful, installing awning window hinges can be a tricky task.

In this article, we’ll walk you through the step-by-step process of installing awning window hinges like a pro. We’ll also provide some tips and tricks to make the job easier.

Tools and Materials You’ll Need

Before you start, you’ll need to gather a few tools and materials. These include:

A drill

A screwdriver

A hammer

A level

A tape measure

A pencil

Awning window hinges

Screws

Step 1: Remove the Old Hinges

If you’re replacing old awning window hinges, the first step is to remove them. To do this, simply unscrew the screws that are holding them in place.

Step 2: Measure and Mark the Hinge Locations

Once the old hinges are removed, you’ll need to measure and mark the locations for the new hinges. To do this, place the new hinge in the desired location and mark the holes for the screws.

Step 3: Drill the Pilot Holes

Once you have the hinge locations marked, you’ll need to drill the pilot holes for the screws. To do this, use a drill bit that is slightly smaller than the diameter of the screws.

Step 4: Install the Hinges

Once the pilot holes are drilled, you can install the hinges. To do this, simply insert the screws into the pilot holes and tighten them until the hinges are secure.

Step 5: Test the Hinges

Once the hinges are installed, you’ll need to test them to make sure they are working properly. To do this, open and close the window several times. The window should open and close smoothly without any binding or sticking.

Tips and Tricks

Here are a few tips and tricks to make the job of installing awning window hinges easier:

Use a level to make sure that the hinges are installed level. This will help to prevent the window from sagging or sticking.

Use a drill bit that is slightly smaller than the diameter of the screws. This will help to prevent the screws from stripping the holes.

Tighten the screws until the hinges are secure, but do not overtighten them. Overtightening the screws can damage the hinges.