How to Fix Common Issues with Sliding Aluminum Door Handles

Sliding aluminum door handles are a common source of frustration for homeowners. They can be difficult to open and close, or they may become loose or broken. If you’re having trouble with your sliding aluminum door handle, don’t despair. There are a few simple steps you can take to fix the problem.

Loose Handle

If your sliding aluminum door handle is loose, it’s likely that the screws that hold it in place have come loose. To tighten the screws, you will need a screwdriver.

1. Locate the screws that hold the handle in place. There are typically two or three screws on each side of the handle.

2. Use a screwdriver to tighten the screws. Be careful not to overtighten the screws, as this could damage the handle.

3. Once the screws are tight, try opening and closing the door to make sure that the handle is secure.

Broken Handle

If your sliding aluminum door handle is broken, you will need to replace it. To replace the handle, you will need a new handle and a screwdriver.

1. Remove the old handle. To do this, locate the screws that hold the handle in place and remove them.

2. Install the new handle. To do this, align the new handle with the holes in the door and insert the screws. Tighten the screws until the handle is secure.

3. Once the new handle is installed, try opening and closing the door to make sure that it works properly.

Difficult to Open or Close

If your sliding aluminum door is difficult to open or close, it’s likely that the track is dirty or obstructed. To clean the track, you will need a vacuum cleaner and a damp cloth.

1. Use the vacuum cleaner to remove any dirt or debris from the track.

2. Wipe down the track with a damp cloth to remove any remaining dirt or debris.

3. Once the track is clean, try opening and closing the door to make sure that it works properly.

If the track is clean but the door is still difficult to open or close, it’s possible that the rollers are worn or damaged. To replace the rollers, you will need a new set of rollers and a screwdriver.

1. Remove the old rollers. To do this, locate the screws that hold the rollers in place and remove them.

2. Install the new rollers. To do this, align the new rollers with the holes in the door and insert the screws. Tighten the screws until the rollers are secure.

3. Once the new rollers are installed, try opening and closing the door to make sure that it works properly.