DIY Tips- Installing Outdoor Sliding Door Handles Like a Pro

Transform your outdoor living space with the effortless slide of a new door handle! Whether you’re replacing a worn-out handle or adding a touch of sophistication, installing an outdoor sliding door handle is a breeze with these expert tips.

Prepare Your Battleground:

Before you begin, gather your tools: a screwdriver, a drill with drill bits, and a level. Remove the existing handle if there is one, and clean the surface of the door where the new handle will be installed.

Measure Twice, Drill Once:

Measure the distance between the center of the two screw holes on the new handle. Mark this distance on the door frame, and ensure it’s level using a level. Drill pilot holes at the marked points, ensuring they are deep enough to accommodate the screws.

Insert the Screws, but Don’t Overdo It:

Carefully align the new handle over the screw holes and insert the screws. Tighten them securely, but avoid overtightening to prevent stripping the screws or damaging the handle.

Test the Slide, Feel the Glide:

Once the screws are in place, test the handle by sliding the door open and closed. It should move smoothly without any resistance. If you encounter resistance, adjust the screws slightly until it operates optimally.

Maintain the Majesty:

To ensure your new outdoor sliding door handle stands the test of time, apply a thin layer of lubricant to the moving parts and clean it regularly with a mild detergent. By following these steps, you’ll have a secure and stylish door handle that enhances the functionality and aesthetic appeal of your outdoor oasis.