A Beginner’s Guide to Installing External Sliding Door Handles

Sliding doors are a popular choice for patios, decks, and other areas where you want to be able to enjoy the outdoors without having to open the door all the way. They’re also a great way to add some extra light and ventilation to your home. If you’re looking to add an external sliding door handle to your home, this guide will show you everything you need to know.

Materials You’ll Need

External sliding door handle

Screwdriver

Drill

Measuring tape

Level

Pencil

Safety glasses

Step-by-Step Instructions

1. Measure and mark the location of the handle. Use the measuring tape and level to mark the location of the handle on the door. Be sure to measure carefully, as you don’t want to have to drill new holes if you make a mistake.

2. Drill the holes. Once you’ve marked the location of the handle, use the drill to drill the holes. Be sure to use a drill bit that is the same size as the screws that came with the handle.

3. Insert the screws. Insert the screws into the holes and tighten them until the handle is secure. Be sure to not overtighten the screws, as this could damage the door or the handle.

4. Test the handle. Once the handle is installed, test it to make sure it works properly. The handle should move smoothly and easily, and it should lock securely in place.

Troubleshooting

If you’re having any problems installing the external sliding door handle, here are a few troubleshooting tips:

If the handle is not moving smoothly, try loosening the screws slightly.

If the handle is not locking securely in place, try tightening the screws slightly.

If the handle is damaged, you may need to replace it.

Installing an external sliding door handle is a relatively simple project that can be completed in a few minutes. By following the steps in this guide, you can easily add an extra level of convenience and security to your home.